Pair 12 Skeeter Performance Compatible Replacement *Blue* Decals - Boat Outboard Motor

Vinyl Decals: About These are DIE-CUT decals, meaning there is no background. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window, as the picture is used only as an example. Vinyl Decals come in 3 pieces: 1. The top layer is a transparent transfer tape, which holds your decal or sticker together until it is applied. 2. The middle layer is your actual decal or sticker, which is sandwiched between the Application Tape and the Wax Backing. 3. The bottom layer is the wax backing, which protects the adhesive until the decal is ready to be applied.

Application Tips: 1. Do not apply on extreme cold or hot surfaces. The ideal temperature must be between 60°F and 90°F. 2. Do not touch the adhesive backing, as oils from your skin will prevent the sticker from sticking. 3. Before applying the decal, make sure there is no wax or oily products on the surface.

Application Instructions: 1. Rub the sticker to ensure the transfer tape is properly adhered to the sticker. 2. Clean and dry the desired area. Stickers will stick best to clean, smooth surfaces. 3. Slowly remove the wax backing, making sure the sticker stays adhered to the transparent transfer tape. 4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles. 6. Use an object like a credit card to make sure the entire sticker is fully adhered to the surface. 7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape. 8. Check for air bubbles. In most cases, air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.

Pair 12" Skeeter Performance Compatible Replacement Decals Blue Vinyl Stickers Boat Outboard Motor set of 2.

product information: