Pair of Glastron Boats Replacement Decals & Stickers (18, White 010)

The available sizes for these vinyl decals are: 12" x 1.5", 18" x 2.25", 24" x 3", and 36" x 4.5".

These are DIE-CUT decals, meaning they have no background. If a background color is shown in the picture, it is only for illustrative purposes. The actual background color will be the color of the surface you place the sticker on, or it will be clear if you put it on a window.

The vinyl decals come in 3 layers: 1. The top layer is a transparent transfer tape, which holds the decal or sticker together until it is applied. 2. The middle layer is the actual decal or sticker, sandwiched between the transfer tape and the wax backing. 3. The bottom layer is the wax backing, which protects the adhesive until the decal is ready to be applied.

Here are some application tips: 1. Do not apply the decal on surfaces that are extremely hot or cold. The ideal temperature range is between 60°F and 90°F. 2. Avoid touching the adhesive backing, as the oils from your skin can prevent the sticker from adhering properly. 3. Before applying the decal, make sure the surface is clean and free of any wax or oily products.

Application Instructions: 1. Rub the sticker to ensure the transfer tape is properly adhered to it. 2. Clean and dry the desired application area. Stickers will adhere best to clean, smooth surfaces. 3. Slowly remove the wax backing, making sure the sticker stays attached to the transparent transfer tape. 4. Carefully position the sticker on the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles. 6. Use a credit card or similar object to ensure the entire sticker is fully adhered to the surface. 7. Slowly remove the transfer tape, making sure no part of the sticker remains on it. 8. Check for any remaining air bubbles. In most cases, these can be worked to the edge of the sticker, and a pin hole can be used to release the air if necessary.

These are a pair of Glastron Boats Compatible Replacement Decals Vinyl Stickers, for use on boat outboard motors. They are made in the USA. Please note that the pictures may not necessarily show the actual size of the item, so be sure to check the size specifications provided.

All the company logos included in this listing are the property of their respective companies and are protected by trademark. They are provided for reference only, and it is the responsibility of the purchaser to ensure proper usage.

product information: